|
|
|
 |
| 126
Standard Chassis 1981 - 1991 |
| Models |
|
300SD,SE, 380SE, 380SEC,420SE, 500SEC,
560SEC. |
| |
|
|
|
|
|
|
The worlds largest selection of
new, used and hard to find Mercedes-Benz 126 standard chassis suspension
system parts. We have shocks, coil springs, coil shims, control arms, ball
joints and assemblies, guide rods, stabilizer bar links, sub frame parts
trailing arms and bushings. We also have parts for your self leveling
system. If you don't see the parts you need on the website give us a call
we probably have it.
Whether you're restoring a
classic or keeping your daily driver running and looking its best we have
the parts you need. |
|
|
| |
| |
|
| Shocks Front |
 |
| Heavy duty Bilstein (A,B) |
|
| |
|
|
| Comfort Bilstein (C,D) |
|
| Shocks Front w/o
self leveling |
| 300SD, 380SE, 500SEC,SEL, 560SEC 1981-1991 |
| A Bilstein Heavy Duty 1 each |
| B Bilstein Heavy Duty 2 each |
| C Bilstein Comfort 1 each |
| D Bilstein Comfort 2 each |
| Req 2 |
|
|
|
|
|
| Shocks Front |
 |
| KYB gas performance (E,F) |
|
|
| Shocks Front
w/o self leveling |
| 300SD, 380SE, 500SEC, 560SEC
1981-1991 |
| E KYB gas performance 1 each |
| F KYB gas performance 2 each |
| |
| Req 2 |
|
|
|
|
|
|
| Shocks Front |
 |
| Sachs OE (G,H) |
|
|
| Shocks
Front |
| 300SD, 380SE, 500SEC, 560SEC
1981-1991 |
| G Sachs Original Equipment 1 each |
| H Sachs Original Equipment 2 each
(upgraded) |
| |
| Req 2 |
|
|
|
|
|
|
| Shocks Rear |
 |
| Bilstein Heavy Duty (A,B) |
|
| |
 |
| Bilstein Comfort (C,D) |
|
| Shocks Rear
w/o self leveling |
| 300SD, 380SE, 500SEC, 560SEC
1981-1991 |
| A Bilstein Heavy Duty 1 each |
| B Bilstein Heavy Duty 2 each |
| C Bilstein Comfort 1 each OUT OF
STOCK |
| D Bilstein Comfort 2 each OUT OF
STOCK |
| |
| Req 2 |
|
|
|
|
|
| |
|
Back to Top |
| Shocks Rear |
 |
| KYB gas (G) |
|
|
| Shocks rear
w/o self leveling |
| 300SD, 380SE, 500SEC, 560SEC
1981-1991 |
| E KYB gas performance 1 each |
| F KYB gas performance 2 each |
| Req 2 |
|
|
|
|
|
|
| Shocks Rear |
 |
| Sachs (G,H) |
|
|
| Shocks rear
|
| 300SD, 380SE, 500SEC, 560SEC
1981-1991 |
| G Sachs Original Equipment 1 each |
| H Sachs Original Equipment 2 each |
| |
| Req 2 |
|
|
|
|
|
|
| Self Leveling System |
 |
| Pump gasket (A) |
|
| |
 |
| Pump seal kit (B) |
|
| Self leveling
system |
| 560SEC 1986-1991 |
| A Hyd pump to block gasket |
| B Pump seal kit - OUT OF STOCK |
| |
|
|
|
|
|
| |
| Accumulator |
 |
| Accumulator (C) |
|
|
| Self leveling
system |
| 560SEC 1986-1991 |
| C Self leveling accumulator |
| |
| |
|
|
|
|
|
| |
| Pump Filter |
 |
| Pump filter (D) |
|
|
| Self leveling
system |
| 560SEC 1986-1991 |
| D self leveling pump filter |
| |
|
|
|
|
|
| |
| Hydraulic Hose |
 |
| Hydraulic hose (E) |
|
| Leveling Valve |
 |
| Self leveling valve (F) |
|
| Self leveling
system |
| 560SEC 1986-1991 |
| E Self leveling hose from hydraulic
pump to feed line |
| F Self leveling valve |
| |
|
|
|
|
|
| |
| |
| Coil Springs |
 |
| Front (A,B) |
|
|
| Coil Springs
Front |
| A Front 300SE,SD, 500SE, SEC |
| B Front 560SEC |
| |
|
|
|
|
|
| |
| Coil Springs |
 |
| Rear without self leveling (C) |
|
| |
 |
| Rear with self leveling (D) |
|
| Coil Springs
Rear |
| C Rear 300SE,SD, 380SE, 500SEC w/o self
leveling |
| D Rear 560SEC with self leveling |
| |
|
|
|
|
|
| |
Back to Top |
| Coil spring shim |
 |
| Front upper |
|
| |
 |
| Rear upper |
|
| Coil spring shim
(rubber) |
| 300SE,SD, 380SE, 500SEC,
560SEC 1981-1991 |
| A Front 8mm |
| B Front 13mm |
| C Rear 14mm |
| D Rear 19mm |
| |
|
|
|
|
|
| Suspension Control Arm Repair Kit |
 |
| Lower control arm to frame |
|
| |
 |
| Guide rod to lower control arm |
|
| Suspension Control
Arm Repair Kit |
| A Lemfoerder Lower control arm to frame
Req. 2 |
| B URO Lower control arm to frame
Req. 2 |
| C URO Guide rod to lower control
arm Req. 2 |
| |
|
|
|
|
|
| Control Arm Strut Mount |
 |
| Meyle |
|
|
| Control arm strut
mount |
| 300SE,SD, 380SE, 500SEC, 560SEC 1981-1991 |
| A Meyle |
| B Eccentric Adjustment Bolt |
| Req. 4 |
|
|
|
|
Back to Top |
| Ball Joints |
 |
| Lemfoerder |
|
| |
 |
| Meyle |
|
| Ball Joints |
| 300SE,SD 380SE, 500SEC, 560SEC 1981-1991 |
| A Lemfoerder |
| B Febi |
| Req. 2 |
|
|
|
|
|
|
|
| |
| Control Arm Ball Joint Assembly |
 |
| Front left upper |
|
|
 |
| Front right upper |
|
| Control arm ball
joint assembly Lower |
| 300SE,SD, 380SE, 500SEC, 560SEC 1981-1991 |
| A Front Left Lower Genuine Mercedes |
| B Front Right Lower Genuine
Mercedes |
|
|
|
|
| |
Back to Top |
| Control Arm Ball Joint Assembly |
 |
| Front left upper |
|
|
 |
| Front right upper |
|
| Control arm ball
joint assembly |
| 300SE,SD, 380SE, 500SEC, 560SEC 1981-1991 |
| C Front
Left Upper Karlyn |
| D Front Right Upper Karlyn |
| E Front Left Upper TRW (Original
Equipment) |
| F Front Right Upper TRW (Original
Equipment) |
|
|
|
|
|
| Guide Rod |
 |
| |
|
|
| Guide rod |
| A Lower control arm to support joint. |
| Good Used Only |
| Req, 2 |
|
|
|
|
|
|
Back to Top |
| Guide Rod Mount |
 |
| Rear of rod (A,B) |
|
| |
 |
| front of rod (C) |
|
| Guide rod mount |
| 300SE,SD, 380SE, 500SEC, 560SEC
1981-1991 |
| A Rear of guide rod at body
Lemfoerder |
| B Rear of guide rod at body Meyle |
| C Front of guide rod at control arm
URO |
| Req. 2 ea.. |
|
|
|
|
|
|
| Stabilizer Bar Link |
 |
| Link (A) |
|
|
| Stabilizer bar
link |
| 300SE,SD, 380SE, 500SEC, 560SEC
1981-1991 |
| A Torsion bar to control arm |
| |
| Req. 2 |
|
|
|
|
|
|
| Stabilizer Bar Mount |
 |
| Stabilizer bar bushing (A) |
|
|
| Stabilizer bar
bushing |
| 300SE,SD, 380SE, 500SEC, 560SEC
1981-1991 |
| A Bushing |
| Req. 2 |
|
|
|
|
|
Back to Top |
| Trailing arm bushing |
 |
| Trailing arm bushing (A) |
|
|
| Trailing arm
bushing |
| 300SE,SD, 380SE, 500SEC, 560SEC 1981-1991 |
| A Trailing arm bushing - 1pc |
| B Trailing arm bushing - 2pcs |
| C Trailing arm bushing - 4pcs |
| Req. 4 - 2 each side |
|
|
|
|
|
| Sub Frame Mounting Kit |
 |
| Sub frame kit (A) |
|
| |
 |
| Sub frame kit (B) |
|
| Sub frame
mounting kit |
| A 300SE,SD, 380SE 1981-1985 |
| B 500SEC 1981-1985 |
| |
| |
|
|
|
|
|
|
|
Back to Top |
